PG260HPINP

$50.42

Have doubts about rebuilding your Starter?

 

Not sure if your starter is bad?

 

Check out some important tips from the PROS!!!

 

At rebuilderinabox, NOTHING is more important than quality assurance. For decades, we have dedicated ourselves to the the acquisition of superior quality starter and alternator components. And this is no easy task, as a result of our years of rebuilding experience, we have conquered the true significance of reliability and longevity. We will warranty all of our parts for the period of 1 year. But this is not an issue. If you follow our program, you will NOT have a warranty. You will NOT have to worry about it. 

SKU: PG260HPIN Category:

Description

PG260HPIN

This is the PG260HPIN starter for most GM cars and trucks  from mid 2006 to present. Notice measurement of the magnet housing in the pic (89mm) and the flat style of the metal back plate from the back view. The bolts that go through the flat back plate and hold the starter together (thru bolts) are internal.  The small pin weathertite terminal on the solenoid is toward the top of the starter (looking at the back) on trucks and turned to the right on cars. Brush holder 131-96. Drive 371-45. Solenoid pin type 231-66. 

Kit includes: Solenoid, bendix, brush holder ass’y, bushings and snap rings.

Vehicle Fits

Make Model Engine Begin year End Year
CHEVROLET AVALANCHE 6.0L V8 2009 2009
CHEVROLET COLORADO 2.9L L4 2008 2012
CHEVROLET COLORADO 3.7L L5 2008 2012
CHEVROLET COLORADO 5.3L V8 2009 2012
CHEVROLET SUBURBAN 2500 6.0L V8 2010 2012
GMC CANYON 2.9L L4 2008 2012
GMC CANYON 3.7L L5 2008 2012
GMC CANYON 5.3L V8 2009 2012
GMC SUBURBAN 2500 6.0L V8 2010 2012

help & warranty

The parent company : Performance Starter & Alternator, Inc. has been in business since 1985.  “Help” is what we’re all about. You don’t have to have any concerns whatsoever that your rebuild may not succeed. If you need help or have a question, e mail us. If you can’t understand the email, call us or leave a voice mail with your name and number. An actual starter alternator rebuilder will call you back.

If you STILL can’t get your rebuild to work, put it in a box and send it to us with your email, phone number and return adress. We will diagnose the problem for you, free of charge. Then, we will will contact you, and tell you what the problem is. At this point, you can make a choice of the following
1. We can fix the problem for you, test the unit to insure operation according to manufacturer’s spec’s, then send it back to you for a nominal fee. Of course, this price will be discussed before we do anything. And if if it’s something minor, we’ll probably fix it for free labor.
2. We can send it back to you, as is, for only the shipping charges, and you can have the satisfaction of  doing the job right for yourself.
3. You can choose to bail and ask for a refund for the cost of the parts.
                                                                               PLEASE BE ADVISED
We at Rebuilder in a Box are accustomed to happy customers. Your successful rebuild  is our success. All through the one year period of beta testing and interviews we maintained a 100% success rate and we have full intentions of maintaining that goal. So if you tend to be a little nervous…you don’t have to be. Our movies are so up close and thorough, our biggest criticizm is that we did “Too good of a job”.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Powered by WordPress. Designed by Woo Themes